This tall cage cage has the following vital statistics¹:

Height: 72" (6ft)

Width: 24" (2ft)

Length: 24" (2ft)

As per the Standard Cage, the outer framework is created from 20x20mm box section steel and 16x16mm box section is used for the bars.

Although quite stable, it is possible to push this one over. The cage is supplied with mounting points in the base to allow it to be secured to the floor and a mounting point/chain to allow it to be 'safety chained' to a wall. Either or both can be used to help prevent the cage from being pushed over.

Click here to see more pictures.

Wall Mounted
The wall mounted cage is the same design as the free standing cage, only that the rear section is not included. Again, this can be used upright or lying down.

Corner Mounted
Still in development, the Corner Cage will be just that

Prices

- Free Standing cage with bars on all sides £219

- Wall Mounted Cage without bars on rear £195

- Corner Cage £189 (to be confirmed)

------------------------------------------------------------------------------------------------------------------------------------------------

All Costs include delivery to mainland UK (excluding Saturdays)*

Bolts/washers, a spanner and the 'flat pack' instructions are all supplied with all cages, all you need to supply is a padlock or similar, everything else is included.

1. As this is a hand made item there are tolerances and imperfections and therefore the sizes may vary slightly.
* This does not include Saturday deliveries; mainland UK as defined by the courier, please ask for a quote if you think your location maybe classed as outside mainland UK as a surcharge may apply.